aqua
computer
selected
device
stored on the Aqua
Computer update serv-
er. The key will not
have to be re-entered
after re-installation of
the software or transfer
of the device to anoth-
er computer, but trans-
ferring the update ser-
vice period to another
device is not possible.
During update service validation and software activation, device serial numbers
and a calculated computer ID are transmitted to and stored on the update server.
No further personal information such as IP addresses are stored.
21. Technical details and care instructions
21.
21.
21.
Technical details and care instructions
Technical details and care instructions
Technical details and care instructions
21.1. Technical details
21.1.
21.1.
21.1.
Technical details
Technical details
Technical details
Power supply voltage (Vin):
Maximum power consumption: 65 Watts (including fan and RGBpx)
Maximum pump pressure:
Maximum fan output power:
Ambient temperature range:
Coolant temperature:
Dimensions (L x W x H)
21.2.
21.2. Restore factory defaults
Restore factory defaults
21.2.
21.2.
Restore factory defaults
Restore factory defaults
There are two options to reset the pump controller to factory defaults. Restoring
factory defaults may be useful if the pump is not properly operating or if erroneous
settings have been saved into the pump.
1. aquasuite: Click the "Reset device to factory defaults" button on the "Sys-
tem" screen.
2. Device menu: Select "System", then "Factory defaults" and confirm by press-
ing the middle key.
21.3. Care instructions
21.3.
21.3.
21.3.
Care instructions
Care instructions
Care instructions
Use a dry and soft cloth for cleaning. All electronic components and headers must
not get in contact with coolant or water!
© 2019-2020
and
5 V DC ±5 %, 12 V DC ±5 %
370 mbar (approx. 3.7 m water head)
25 Watts
10 to 40 °C (noncondensing)
0 to 50 °C
ca. 66 x 65 x 78 mm (without attached cables)
Aqua Computer GmbH & Co. KG
Gelliehäuser Str. 1, 37130 Gleichen
D5 NEXT
- 29 -
Need help?
Do you have a question about the D5 NEXT and is the answer not in the manual?