Section 4: Setup; Unpacking; Inventory - Grizzly T32005 Owner's Manual

Unpacking

Your tool was carefully packaged for
safe transportation. Remove the packag-
ing materials from around your tool and
inspect it. If you discover the tool is dam-
aged, please immediately call Customer
Service at (570) 546-9663 for advice.
Save the containers and all packing mate-
rials for possible inspection by the car-
rier or its agent. Otherwise, filing a freight
claim can be difficult.
When you are completely satisfied with
the condition of your shipment, inventory
the contents.
If any non-proprietary parts are missing
(e.g., a nut or a washer), we will gladly
replace them; or for the sake of expedi-
ency, replacements can be obtained at
your local hardware store.
This cut-off saw presents serious
injury hazards to untrained users.
Read through this entire manual to
become familiar with the controls
and operations before starting the
tool!
-10
-

SECTION 4: SETUP

Inventory

Inventory (Figure 2)
A. Cut-Off Saw .......................................1
B. Hold-Down Clamp ..............................1
C. Hex Wrench 2.5mm ...........................1
D. 2" Grinding Blade ...............................1
D
C
Figure 2. Inventory.
If you cannot find an item on this
list, carefully check around/inside
the tool and packaging materials.
Often, these items get lost in pack-
aging materials while unpacking or
they are pre-installed at the factory.
Model T32005 (Mfd. Since 04/20)
Qty
A
B