Positioning The Zmachine - General Sleep Zmachine Insight Patient Manual

Positioning the Zmachine

If you received your Zmachine with a hanging cover and a 3M Command
Medium Utility Hook (pictured), your system can be positioned to hang
behind your head during sleep. This allows you to orient the patient cable
toward the top of your head, thereby allowing the maximum freedom of
movement during sleep.
Hanging Cover (white)
Apply the 3M Command Hook in accordance with manufacturer
instructions. Locate the hook at the head of your bed, either on the wall or
headboard, just to the side of where you normally sleep, and approximately
two (2) feet above your bed (see red boxes for sample locations).
Locate the hook such that the Zmachine will not hit
Patient Guide
your head if it were to fall.
3M Command Hook
(medium size)
®
5