Step 8: Remove The Sensor Pads - General Sleep Zmachine Insight Patient Manual

Step 8: Remove the Sensor Pads

When you are finished trying to sleep and the patient cable has been
disconnected from the Zmachine:
1. Unsnap the patient cable wires from the sensor pads.
2. Carefully peel the sensor pads from you skin and discard.
3. Remove any remaining gel and/or adhesive from your skin using
soap and water or an alcohol swab.
Unsnap patient cable
Warning! The used sensor pads are a choking hazard
and should be kept away from children and pets.
Patient Guide
wires
→
Remove sensor pads &
clean skin
13