Step 3: Secure The Sensor Pads - General Sleep Zmachine Insight Patient Manual

Step 3: Secure the Sensor Pads

Never press the center portion of the sensor pad. Rub the outer edge of
each sensor pad with your fingertip to secure the adhesive.
Note: If you are not satisfied with the placement of a sensor pad, simply
remove, discard, and repeat the steps above using a fresh sensor
pad. Never re-use a sensor pad.
Now, wait 30 minutes before continuing onto Step 4.
This will allow time for the sensor pads to adhere
8
NO!
YES
properly to your skin.
Patient Guide