Epson EMP-7500 Owner's Manual page 37

Downloaded from:
To connect a video source to the projector:
1. Switch off the projector and video source if they are on.
2. If your composite video uses an RCA-type composite
video connector, you will need the audio/ video cable
supplied with the EMP-7500/ 5500. If your video uses a
S-Video, you will need to provide YO U R O WN S-Video
or use the S-Video cable that came with your video source.
3. For composite video, connect the yellow RCA plug at one
end of the video/ audio cable to the projector's Video
jack. Connect the other yellow RCA plug to the video-out
jack on the video source.
4. Connect the other plugs on the audio/ visual cable to the
Audio jacks of the projector: insert the white plug into the
L jack and the red plug into the R jack. Connect the plug
at the other end of the audio/ visual cable to the audio
output jacks of the video source.
http://www.usersmanualguide.com/
A/V cable
Connecting to a Computer 17