Using The Document Cd-Rom - Epson EMP-735 Read This First Manual

Using the Document CD-ROM

You need Adobe Acrobat Reader (referred to hereafter as Acrobat Reader) to
view the guide on the Document CD-ROM included with the projector.
If Acrobat Reader is not installed on your computer, you will need to install it.
Acrobat Reader can be installed from the Document CD-ROM.
The installation procedure varies depending on whether you are using a
Windows or Macintosh computer. The procedures for both computers are given
below.
For Windows
Turn on the computer. Insert the Document CD-ROM into the CD-
ROM drive.
I
f you have installed Acrobat Reader, the TOP page of the guide will be
displayed automatically. See "Viewing the Guide".
I
f you have not yet installed Acrobat Reader, a message will be displayed.
1
2
Tip :
When opening Acrobat Reader for the first time after installation, the "Software
License Agreement" will be displayed. After reading the contents of the "Software
License Agreement", click "Accept"to display the TOP page of the guide. If you
click "Decline", you cannot view the guide.
For Macintosh
1 Turn on the computer. Insert the Document CD-ROM into the
CD-ROM drive.
2 For users of Mac OS 8.6 and 9.x, double-click
"Launcher_for_OS86_9x". For users of Mac OS X, double-click
"Launcher_for_OSX".
I
f you have installed Acrobat Reader, the TOP page of the guide will be
displayed automatically. See "Viewing the Guide".
6
Downloaded from:
Follow the message instructions to install Acrobat Reader.
Once the installation is complete, press the eject button of the
CD-ROM drive. When the drive tray has fully opened, close it
again.
This will cause the computer to restart the CD-ROM, and Acrobat
Reader will open.
http://www.usersmanualguide.com/