Table of Contents
Advertisement
Removing a memory module
If you need to remove a memory module:
1
Complete steps
page 48
module slot cover.
2
Pull the latches away from the memory module.
The memory module pops up slightly.
NOTE
1–8
to shut down the computer and open the memory
Do not try to remove a memory module with the computer turned on.
You can damage the computer and the memory module.
Do not remove the memory module while the computer is in Sleep or
Hibernation mode. The computer could hang up the next time you
turn it on and data in memory will be lost. In either of the above
cases, the Sleep configuration will not be saved.
The following screen appears when you turn on the power:
(Sample Illustration) Windows
®
If "Start Windows
If one of the Safe Mode options is highlighted, it is best to press
to go into Safe Mode, then shut down and restart the system, at
Enter
which time Windows
When Safe Mode is suggested, this could be a sign that you may
need to scan your hard drive for errors or defragment the drive. If so,
®
consult Windows
If your system has the memory modules stacked on top of one
another, you must remove the top module first before
removing/installing the bottom module.
Adding memory (optional)
in
"Installing a memory module" on
®
Error Recovery Screen
Normally" is highlighted, then press
®
should boot back up normally.
Help and Support.
Getting Started
Enter
53
.
Advertisement
Table of Contents
