Display modes
or
Fn
+
This TOSHIBA Card or hot key cycles through the power-
on display options.
The display modes are:
❖
LCD = Internal Display only
❖
LCD + CRT = Internal display and External
Monitor simultaneously
❖
CRT = External monitor only
❖
LCD + CRT Multi Monitor = Internal Display and
External Monitor with one as the Primary Display
and the other as an Extended desktop
❖
Swap = Switch Primary Display between Internal
Display and External Monitor when using
Extended Desktop
To use a simultaneous mode, you must set the resolution of
the internal display panel to match the resolution of the
external display device.
Selecting this Card or pressing the hot key displays the
following options:
(Sample Image) Display mode options
Cycle through the display modes, then select the desired
mode.
Hot Keys
Hot Key Functions
211