Setting Up A Pc Card For Your Computer; Inserting An Sd Media Card - Toshiba Portege 4000 User Manual

70
Connecting Other External Devices

Inserting an SD Media card

3 Push the eject button again so the card will pop out.
4 Grasp the edges of the PC Card and slide it out of the slot.

Setting up a PC Card for your computer

Some PC Cards are ready to use as soon as you install them.
Others, such as hard disk cards and SCSI adapters, may need to be
set up to work with your computer. To set up your PC Card, refer
to the documentation that came with the card or refer to your
operating system manual or online help.
Inserting an SD Media card
To insert an SD Media card, turn the card so that the connector
(metal area) faces down then push the card in the slot until it locks
in place.
If the operating system does not recognize an inserted SD Media
card, remove and insert it again.
To remove an SD Media card, press the card inward to release it.
The card pops out slightly.
The green LED on the left side of the SD Media slot will glow
when the card is being accessed.
CAUTION: Do not touch the SD Media connector. You could
expose the storage area to static electricity which can destroy
data.
Do not remove an SD Media card while data is being written
or read. Even when the message "copying..." in the windows
disappears, the computer may be writing to the computer
and your data could be destroyed. Wait for the SD Media
indicator light to go out.