Using The Accupoint Ii - Toshiba Portege 4000 User Manual

80
Learning the Basics

Using the AccuPoint II

To use the numeric overlay keys while the cursor control overlay is
on:
Hold down


To return to the cursor control overlay, release


To disable the cursor control overlay, hold down the
press
F10
indicator panel goes out.
Using the AccuPoint II
AccuPoint II keys
AccuPoint II pointing device—Enables you to move the cursor
and to select items on the screen. (If you would prefer to use a
mouse or trackball, you can connect one to the computer's USB
port, PS/2 port, or to the optional port replicator's serial port. See
"Using a mouse" on page
To move the cursor, gently push the pointing device in the
direction you want the cursor to move. Pushing harder on the
pointing device moves the cursor faster.
Programmable buttons—Each button can be programmed to
perform a function you select. To program these buttons:
1 Double-click the mouse icon in the task tray.
while you use the numeric overlay keys.
Shift
again. The cursor control mode light on the keyboard
AccuPoint II
pointing device
Programmable button
Programmable button
Primary button
Secondary button
54.)
.
Shift
key and
Fn