Setting Up Your Pc Card For Your Computer - Toshiba Satellite 200 Series User Manual

Setting Up Your PC Card for Your Computer

You may insert Type I or Type II cards into either the upper or
lower socket. You may insert a Type III card into the lower socket
only. Inserting a Type III card takes up all the space for both
slots—you cannot have a Type III card installed with any other
card.
To insert a PC card, follow these steps:
1 Locate the PC card slot on the left side of the computer.
Inserting a Type II PC card into the PC card slot
2 Insert the PC card.
If you have a Type III card, insert the connector into the lower
part of the socket. If you have a Type I or Type II card, insert it
into either the top or bottom half of the slot.
3 When the card is almost all the way into the slot, push
firmly, but gently, to ensure a firm connection with the
computer.
When the card is fully seated, an eject button pops out: the top
button for the upper slot and the bottom button for the lower
slot.
4 Pull the eject button out slightly and fold it down to the left.
Do not force the card into position.
Setting Up Your PC Card for Your Computer
Some PC Cards, such as many fax/modems and hard disk (ATA)
cards, are ready to use as soon as you install them. Others, such as
network cards and SCSI adapters, require additional steps to set
them up to work with your computer.
Little Cards That Do Big Things
PC card
177