Table of Contents
Advertisement
3
Gently lift the memory module to a 30-degree angle and slide it
out of the slot.
(Sample Illustration) Removing the memory module
4
Replace the memory module slot cover and secure it using the
screws.
5
Re-insert the main battery. For more information on inserting
the main battery, see
6
Turn the computer right side up.
7
Reconnect the cables.
8
Restart the computer.
Checking total memory
When you add or remove a memory module, you can check that the
computer has recognized the change. To do this:
1
Click Start, Control Panel, Performance and Maintenance,
and then System.
2
The General tab view automatically appears and shows total
memory.
If the computer does not recognize the memory configuration, turn
off the computer and remove the memory module slot cover
(complete steps
and then check that the module is inserted completely into the
socket and lined up squarely with the socket latches.
TECHNICAL NOTE: You must have at least one memory module
installed for the computer to work.
1-8
in
"Installing a memory module" on page
Getting Started
Adding memory (optional)
Slot B
Slot A
Back of computer
"Inserting a charged battery" on page
57
110.
51),
Advertisement
Table of Contents
