Table of Contents
Advertisement
Quick Connect
The Quick Connect feature includes two options:
❖
Toshiba Wireless Projector. Switches the Wireless LAN
connection to connect to a Toshiba Wireless Projector
❖
Direct Link Toshiba Device. Launches ConfigFree
SUMMIT
Toshiba Wireless Projector
The Quick Connect feature switches the Wireless LAN connection
to connect to a Toshiba Wireless Projector. Once the projector
utility is installed, launching the Quick Connect utility
automatically opens the Wireless Data Projector Application. There
you can configure how you would like to use the projector.
To connect to a Toshiba Wireless Projector:
1
Click the
2
Use the pointing device to select the Toshiba Wireless
Projector (DPJ), then click Connect.
Launching Quick Connect prevents you from using the network to
connect to a Toshiba Wireless Projector when the wireless LAN
Configuration is set to Ad Hoc. If you are connected to an access
point, the connection is broken and re-established later.
To review the current Toshiba Wireless Projector settings and
change them if necessary:
1
Click the
2
Use the pointing device to select the Toshiba Wireless
Projector (DPJ), then click Settings. The Quick Connect
properties dialog box appears.
3
Complete the settings. Refer to the online Help if necessary.
4
Click OK.
NOTE
Using ConfigFree
icon in the system tray.
icon in the system tray.
Because the wireless LAN's default connection setting is for Ad Hoc
mode, the Toshiba Wireless Projector will not connect if the projector
is set to Infrastructure mode. If this occurs, you can change the
wireless LAN's connection setting to Infrastructure mode to match
the settings on the projector.
®
with your Toshiba Computer
ConfigFree
215
®
Utilities
®
Advertisement
Table of Contents
