Comfort Adjustments - Quantum KOZMO Owner's Manual

Comfort Adjustments

After becoming familiar with your power chair's operation,
you may find the need to make some adjustments to
increase your comfort, such as seat height, armrest width,
foot platform depth and angle, and controller position. Use
the steps below to make comfort adjustments.
WARNING!
The center of gravity of your power chair was factory set
to a position that meets the needs of the demographic
majority of users. Your Quantum Rehab Provider has
evaluated your power chair and made any necessary
adjustments to suit your specific requirements. Do
not change your seating configuration without first
contacting Quantum Rehab or your Quantum Rehab
Provider.
Some power chair components are heavy. You may
need assistance to lift or carry them. Please refer to
the specification table for specific component weights
before you disassemble the power chair.
Remove the occupant from the power chair before
making any adjustments.
You may need the following to make comfort adjustments:
metric/standard socket set and ratchet
„
„ adjustable wrench
metric/standard hex key set
„
„ thread lock
Seat Height Adjustment
You can adjust the seat to two different heights in 1 in. (2.5-
cm) increments. Seat height adjustment requires the removal
of the battery box.
To change the seat height:
1. Turn off the power to the controller.
2. Ensure the power chair is in drive mode. See figure 2.
3. Disconnect the controller from the power base. See
figure 4.
4. Disengage the seat release lever.
5. Swivel the seat left or right and then pull it up and off of
the power base.
6. Remove the battery box.
7. Loosen the hardware at the rear of the seat post. See
figure 7.
8. Pull seat post pin for height adjustment. See figure 7.
9. Raise or lower the upper seat post to the desired position.
10. Reinstall seat post pin.
11. Tighten the hardware at the rear of the seat post.
12. Reinstall the battery box.
13. Reinstall the seat.
14. Reconnect the controller to the power base.
NOTE: To rotate the seat, use the seat release lever
located under the front of the seat.
COMFORT ADJUSTMENTS
Seat Post
Securement
Hardware
Lower
Seat
Post
Figure 7. Seat Height Adjustment
11
Upper
Seat
Post
Release
Pin