Assembly/Disassembly - Quantum KOZMO Owner's Manual

Initial Assembly
Your power chair may require some assembly either
before initial use or after transportation. It may also require
disassembly to make some comfort adjustments. Figure 3
details those parts of the power chair that are designed
to be disassembled and assembled by an end user or by
a qualified caregiver before using the product or making
comfort adjustments. There are two hex keys provided for
use with controller installation and adjustment and foot
platform adjustment.
NOTE: Any nylon insert lock nut removed during the
disassembly or adjustment of the power chair must be
replaced with a new nut. Nylon insert lock nuts should
not be reused as it may cause damage to the nylon
insert, resulting in a less secure fit. Replacement nylon
insert lock nuts are available at local hardware stores or
through your Quantum Rehab Provider.
Seat Installation
It may be necessary to install the seat either prior to initial
operation or after transporting your power chair. The seat is
attached to the power base by a height-adjustable seat post.
WARNING!
Do not pick up the seat frame by the armrests. They are
free to pivot, and you may lose control of the seat if they
do so.
To install the seat:
1. Adjust the seat height if necessary. See "Comfort
Adjustments." Set the seat onto the seat post. See
figure 3.
2. Install the controller into the armrest, and tighten the
mounting screws in the controller mounting block.
3. Route the controller harness to the rear of the power
base.
4. Plug the controller harness connector into the power
base.
5. Secure the controller harness to the armrest with wire
ties. See figure 4.
MANDATORY!
Prevent controller harness damage! Avoid routing the
controller harness on the outside of the armrest pad.
Route the harness under the armrest or toward the
inside of the armrest pad. Use correct tie-down points
for the controller harness to prevent the harness from
getting caught in the drive tires, pinched in the seat
frame, or damaged when passing through doorways.

ASSEMBLY/DISASSEMBLY

Armrest
Seat Post
Figure 3. Kozmo Portable Assembly View
Figure 4. Seat Installation
9
Back
Canes
Seat
Pan
Controller
Battery
Box
Foot
Platform