Copyright Notice; Intended Audience - Congatec conga-SMX8-Mini Quick Start Manual

Preface
This quick start guide provides information about the contents of the
conga-SMX8-Mini (Prototype Revision X.2) sample distribution set and how
to set it up.
Disclaimer
The information contained within this quick start guide, including but not
limited to any product specification, is subject to change without notice.
congatec AG provides no warranty with regard to this guide or any other
information contained herein and hereby expressly disclaims any implied
warranties of merchantability or fitness for any particular purpose with
regard to any of the foregoing. congatec AG assumes no liability for any
damages incurred directly or indirectly from any technical or typographical
errors or omissions contained herein or for discrepancies between the
product and this guide. In no event shall congatec AG be liable for any
incidental, consequential, special, or exemplary damages, whether based
on tort, contract or otherwise, arising out of or in connection with this guide
or any other information contained herein or the use thereof.

Intended Audience

This guide is intended for technically qualified personnel. It is not intended
for general audiences.
Lead-Free Designs (RoHS)
All congatec AG designs are created from lead-free components and are
completely RoHS compliant.
Copyright © 2019 congatec AG
Electrostatic Sensitive Device
All congatec AG products are electrostatic sensitive devices. They are
enclosed in static shielding bags, and shipped enclosed in secondary
packaging (protective packaging). The secondary packaging does not
provide electrostatic protection.
Do not remove the device from the static shielding bag or handle it, except
at an electrostatic-free workstation. Also, do not ship or store electronic
devices near strong electrostatic, electromagnetic, magnetic, or radioactive
fields unless the device is contained within its original packaging. Be aware
that failure to comply with these guidelines will void the congatec AG
Limited Warranty.

Copyright Notice

Copyright © 2019, congatec AG. All rights reserved. All text, pictures and
graphics are protected by copyrights. No copying is permitted without
written permission from congatec AG.
congatec AG has made every attempt to ensure that the information in
this document is accurate yet the information contained within is supplied
"as-is".
Trademarks
Product names, logos, brands, and other trademarks featured or referred
to within this guide, or the congatec website, are the property of their
respective trademark holders. These trademark holders are not affiliated
with congatec AG, our products, or our website.
Certification
congatec AG is certified to DIN EN ISO 9001 standard.
SX8M_SDS_q12
TM
2/7