Setup - Toro 686 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
3
4
Media and Additional Parts
Description
Operator's Manual
Determine the left and right sides of the machine from the normal operating position.
Description
Tongue assembly
Bracket
Bolt (1/2 x 2-1/2 inch)
Nut (1/2 inch)
Washer (1/2 inch)
Lock washer (1/2 inch)
Lock pin
Hairpin cotter pin (small)
Pump and cylinder assembly
Screw (3/8 x 1-1/4 inch)
Washer (3/8 inch)
Locknut (3/8 inch)
Screw (1/2 x 1-1/4 inch)
Nut (1/2 inch)
Lock washer (1/2 inch)
Vibration strap
Cylinder pin
Hairpin cotter pin (large)
Qty.
1
2
6
6
6
6
1
1
1
2
2
2
1
1
1
1
2
2
Qty.
1 Read before operating the machine.
5
Use
Mount the tongue assembly.
Attach the pump and cylinder assembly.
Use