Fluke 729 Series User Manual page 16

The screen has two sections:
The upper display shows the internal pressure controller
status and includes:
• Mode: Measure, Source, and Vent
•
Pressure Value: Current measured pressure and unit
•
Status: Shows nothing in measure mode, NOT READY,
STABLE in source mode, and VENTING, VENTED in
vent mode.
• Setpoint: Current setpoint for source function.
• Step Size: The step size when B (Step Up) and
C (Step Down) are pushed when sourcing
pressure.
Find Quality Products Online at:
GlobalTestSupply
www.
Automatic Pressure Calibrator
The lower display shows the electrical status and includes:
•
Mode: Measure Current, Source Current, Simulate
Current, Measure V dc, and Switch.
•
Reading: Current reading from measure functions or
setpoint for source functions.
•
Switch State: Shows the pressure reading when the
switch contacts open and close.
• Percent: Shows the percentage value of 4 mA to 20 mA
or 1 V to 5 V in measure functions.
•
Status: Shows Open circuit detected in mA source
mode.
.com
The Display
11
sales@GlobalTestSupply.com