Miscellaneous; Charge - Bosch TPA 300 User Manual

1. CHARGE

Low Battery Indication
Your TPMS TOOL incorporates a low battery detection
circuit. Battery life is an average of 300 sensor tests
per battery charge (approximately 60 to 80 vehicles)
this may change following the sensor model.
DO NOT use the tool with low battery status because the transmission and emission may
not be reliable.
Universal charger
For charging the tool, directly plug the supply USB cable to the tool and plug the supply in
an appropriate outlet. The battery icon will change to reflect the charging status:
Battery replacement
Please recycle the used battery, see Battery and Recycling dedicated section in
this user manual.
UM-BTPA1-6

MISCELLANEOUS

USB B cable
Unscrew the two
screws on the
back of the tool.
Remove the cap.
Unplug the
battery and
change the
battery by a new
one.
Reinstall the cap
and the screws.
40/54
TPA 300 user guide
Battery indicator status:
When low, icon is flashing and
the tool will turn off after 10 s.
USB B socket
User guide BOSCH TPA 300