TPA 300 USAGE WITH BOSCH SCAN TOOL
TPA 300 Connect to scan tool mode is used to register the TPMS sensors IDs into
the vehicle's ECU. If you need to program and copy TPMS sensors, test RKE, save
and read recorded jobs, and setup the tool you must use the TPA 300 Standalone
mode. For basic checking of the TPMS sensors – without writing into the vehicle
ECU – you can either use the TPA Standalone mode. See this user manual
dedicated section to learn how to operate this mode.
Note: The first time you use a TPA 300 with a Bosch scan tool you need to do a Bluetooth
pairing procedure to link the devices together. Please note that Bosch scan tool previously
paired devices can still be used alongside with the TPA 300.
1. BLUETOOTH PAIRING
The tool is ready to
activate the
Bluetooth
connection.
TPA 300 is ready to
pair with Bosch
scan tool.
UM-BTPA1-6
IMPORTANT:
34/54
TPA 300 user guide
= Continue
= Previous
= To
confirm
Use the
Bosch
scan tool
for the next
steps.
User guide BOSCH TPA 300