2. PROGRAM TPMS SENSORS
The TPA 300 works with most known aftermarket universal programmable sensors, with
the options to create the new sensor IDs and/or duplicate sensor ID(s) from original
sensor(s).
To access the program sensor function, you must start by selecting the Make/Model/Year
of the targeted vehicle.
Go to the program sensor icon located at the very bottom of the trigger screen (car
view when reading TPMS sensors) to open the Program Sensor function.
Scroll up and down
to select the
programmable
sensor brand.
Note: Following your options, some above brands in the example may change.
Depending on the sensor selected, you may have to choose a sensor model.
Select a
programmable
sensor model.
UM-BTPA1-6
15/54
TPA 300 user guide
= Continue
= Previous
= Continue
= Previous
= Continue
= Previous
User guide BOSCH TPA 300