Table of Contents
Advertisement
Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Before each use or daily
Every 25 hours
Every 200 hours
Before storage
CAUTION
If you leave the key in the switch, someone could accidently start the engine and seriously
injure you or other bystanders.
Remove the key from the switch before you perform any maintenance.
Greasing the Plow
Service Interval: Before each use or daily
Before storage
Grease the 6 fittings, as shown in
Figure
14, every 8 operating hours. Grease all fittings
immediately after every washing.
Grease Type: General-purpose grease
1.
Park the machine on a level surface, disengage
the auxiliary hydraulics lever, lower the
attachment, and engage the parking brake (if
equipped).
2.
Shut off the engine and remove the key
3.
Connect a grease gun to each fitting.
4.
Pump grease into the fittings until grease begins
to ooze out of the bearings.
5.
Wipe up any excess grease.
Maintenance Procedure
• Grease the plow.
• Check the gear-lube level.
• Change the gear lube.
• Grease the plow.
• Check the gear-lube level.
• Paint chipped surfaces.
Figure 11
through
Figure 11
g005031
10
Figure 12
Figure 13
g005032
g005033
Advertisement
Table of Contents
