Related Manuals for Toro 22410
Summary of Contents for Toro 22410
- Page 1 Form No. 3353-840 Rev B Loose Materials Bucket for Compact Utility Loaders Model No. 22410—Serial No. 890001 and Up Register at www.Toro.com. Original Instructions (EN)
-
Page 2: Table Of Contents
Whenever you need service, genuine Toro parts, or additional information, contact an Authorized Service Dealer or Toro Customer Service and have the model and serial numbers of your product ready. The model and serial numbers are located on a plate on the back of the bucket. -
Page 3: Safety
Safety When going up or down hill, the machine could Improper use or maintenance by the operator or overturn if the heavy end is toward the downhill owner can result in injury. To reduce the potential side. Someone may be pinned or seriously for injury, comply with these safety instructions and injured by the machine if it overturns. - Page 4 Stability with a Loaded Bucket Stability with an Unloaded Bucket For TX Traction Units or Wheeled Traction Units For TX Traction Units or Wheeled Traction Units Without a Counterweight Without a Counterweight Orientation Stability Rating Orientation Stability Rating Front Uphill Front Uphill Rear Uphill Rear Uphill...
-
Page 5: Safety And Instructional Decals
Safety and Instructional Operation Decals Note: Always use the traction unit to lift and move the attachment. Safety decals and instructions are easily visible to the operator and are located Refer to your traction unit Operator’s Manual for more near any area of potential danger. information on installing and removing the bucket Replace any decal that is damaged or from your traction unit. -
Page 6: Storage
Storage Material Density Chart Material Density (Approximate) 1. Before long term storage, wash the attachment with Caliche 78 lb/ft (1250 kg/m mild detergent and water to remove dirt and grime. Clay: 2. Paint all scratched or bare metal surfaces. Paint is Natural bed 104 lb/ft (1600 kg/m... - Page 7 Notes:...