Table of Contents
Advertisement
58
Getting Started
Using the computer for the first time
The hard disk drive light flashes to indicate that the hard
disk drive is currently in use.
CAUTION: Never turn off the computer while any drive is in use.
Activating the power-on password
When you first power up your computer, no password is
required. But you can set up your computer so that a
password is required to complete the powering up process in
the future.
To activate the power-on password:
1
Press the TOSHIBA Console button.
The TOSHIBA Console window appears. For more
information see
2
Click Security.
3
Click User password.
4
Follow the on-screen instructions.
The password requirement becomes active the next time
you turn on your computer.
When the feature is active, the Sub LCD will display
"password ="during the power-on process. As you type
your password, the characters will appear as asterisks in
the Sub LCD. After typing your password, hit the Enter
key.
"TOSHIBA Console" on page
119.
Advertisement
Table of Contents
