Table of Contents
Advertisement
Services, you should use the files included in the Windows
XP operating system.
Inserting PC Cards
Inserting a PC Card
1
If your PC Card does not support hot swapping, save
your data and turn off the computer before inserting the
PC Card. For more information, see
page
2
Hold the PC Card with the arrow or main label side up
and the connector side toward the slot.
3
Align the card connectors with an available PC Card slot
and carefully slide the card into the slot until it locks into
place.
NOTE: If you have a Type III card, insert the connector into the
lower slot. If you have a Type II card, you can insert it into either
the upper or the lower slot.
184.
Exploring Your Options
Using PC Cards
"Hot swapping" on
183
®
Advertisement
Table of Contents
