Table of Contents
Advertisement
50
Getting Started
Connecting a mouse
Removing a memory module
1
Follow steps 1 through 6 in
memory (optional)" on page
2
Gently push the memory locks outward until the memory
module pops up.
3
Gently pull the memory module diagonally out of the
slot.
4
Complete the procedure by following steps
14.
Connecting a mouse
You may want to use a mouse instead of the TouchPad, the
computer's built-in pointing device. Your computer can
accommodate only a USB-compatible mouse.
To connect a mouse, plug the mouse cable into one of the
computer's USB ports.
Connecting a printer
You can connect a USB-compatible printer to your computer
through the USB ports. To determine if the printer is USB-
compatible, check its documentation.
To achieve the connection, you need a suitable USB cable,
which may come with your printer. You can purchase one
from a computer or electronics store.
To connect a printer:
1
Connect the USB cable to the USB port.
2
Connect the printer's power cable to a wall outlet and
turn on the printer.
See your printer documentation for additional configuration
steps, or see
"Setting up a printer" on page
"Installing additional
46.
61.
11
through
Advertisement
Table of Contents
