Going Into Standby Mode More Quickly - Toshiba 1105 User Manual

2 Click Standby.
Sample Turn off computer dialog box
The computer saves the status of all open programs and files
to memory, turns off the display, and goes into a low-power
mode. The on/off light blinks to indicate the machine is in
Standby mode.
NOTE: If you power down using the Standby command and the
battery discharges fully, your information will be lost. Be sure to
save your work first.
NOTE: If you power down using the Standby command and the
battery discharges fully, your information will be lost. Be sure to
save your work first.

Going into Standby mode more quickly

In addition, you can put the computer into Standby mode by
either pressing the power button or closing the display panel.
You can also specify an amount of time after which the
computer automatically goes into Standby mode.
To use any of these methods, you first need to enable them in
Toshiba's Power Saver utility.
1 Open the Start menu, then click Control Panel.
Learning the Basics
Using Standby
83