Table of Contents
Advertisement
Plug and Play
With Plug and Play and the Windows
avoiding hardware conflicts is easy. Plug and Play is a
computer standard that helps the system BIOS (basic input/
output system) and the operating system to automatically
assign resources to Plug and Play-compliant devices. In
theory, if every device connected to the computer is Plug and
Play-compliant, no two devices will compete for the same
system resources. Simply plug in the device and turn on your
computer. The operating system automatically sets up your
system to accommodate the new device.
If you install an older (legacy) device that the operating
system cannot recognize, the operating system may have
difficulty assigning resources to it. As a result, a hardware
conflict can occur. To see what resources the operating
system has assigned to the device, see
properties" on page
Resolving conflicts
There are three things you can do to resolve hardware
conflicts:
❖
Disable the device.
For an older device, remove it from the computer. For a
Plug and Play device.
❖
Disable another system component and use its resources
for the new device.
❖
Reconfigure the device so that its requirements do not
conflict. Refer to the device's documentation for
instructions about changing settings on the device.
If Something Goes Wrong
Resolving a hardware conflict
185.
®
XP operating system,
"Checking device
183
Advertisement
Table of Contents
