Product Information; Description; Application; Specifications - Daikin BACnet MT3041 Installation And Maintenance Manual

Inc; Windows from Microsoft Corporation; Daikin, Maverick II,
This manual provides instructions for installing or replacing
the BACnet communication module on a MicroTech 4 (Rebel
Applied) or MicroTech III (Rooftop Applied Systems, Self-
Contained Unit and Maverick II models) Commercial Packaged
Rooftop System unit controller. It describes how to set up the
unit controller for network communication and troubleshoot
common network issues.

Description

The BACnet communication module is a printed circuit board
with a plastic enclosure that connects to the left side of the unit
controller or attached module. The BACnet communication
module has application software that enables the unit controller
to pass parameters using the BACnet IP protocol

Application

The BACnet communication module connects the unit
controller to a building automation system (BAS) on a BACnet
local area network. It enables the exchange of BACnet objects
between the network and the unit controller. Refer to MicroTech
4 Rebel Applied or MicroTech III Applied Air Handling Unit
Controller Operation Manual for unit controller display menu
options. The Reference Documents
numbers and locations.

Specifications

General
W x H x D: 1.77 x 4.33 x 2.95 in (45 x 110 x
Dimensions
75 mm)
Weight 3.5 oz (98 g)
Base - plastic, pigeon-blue
Material
Housing - plastic, light-gray
Operating
Temperature -40 - 158°F (-40 - 70°C)
Humidity <90% RH
Min. 10 psi (70kPa), corresponding to max.
Atmospheric pressure
9,842 ft (3,000 m) above sea level
Storage and Transportation
Temperature -40 - 158°F (-40 - 70°C)
Humidity <95% RH
Min. 3.77 psi (26 kPa), corresponding to max.
Atmospheric pressure
32,808 ft (10,000 m) above sea level
Electrical
Via unit controller: DC 5 V (+5% / –5%), max.
Power
270 mA
Ethernet 10/100 over CAT 5 cable
Network connection
RJ-45 port, 8-pin connector
Additional Components
10-pin plug between communication module
Board-to-board connector
and unit controller
Agency Listings
US UL916, UL873
Canada CSA C22.2M205
Europe
EMC directive 2004/108/EC
Low-voltage directive 2006/95/EC
RoHS directive 2002/95/EC
IM 916-5 • MICROTECH COMMUNICATION MODULE
(Figure 1.)
section provides literature
Rebel, and MicroTech from Daikin Applied Americas.

Component Data

The BACnet communication module is a printed circuit board
with a plastic enclosure. It connects directly to the left-hand
side of the unit controller as shown in
possible that another module is also connected to the unit
controller. In this case, the BACnet communication module
simply attaches directly to the left side of the existing module
instead of the unit controller.
Figure 2 shows the important features of the BACnet
communication module.
Figure 1: BACnet Communication Module Attached to
.
Main Controller
Figure 2: BACnet IP Communication Module
RJ-45 Network
Connector
4

Product Information

Product Information
Figure 1. It may be
BUS LED
BSP LED
www.DaikinApplied.com