Toshiba Qosmio G35-AV650 Series User Manual page 60

60
Getting Started
Adding memory (optional)
8 Place the screw and the memory module slot cover in a
safe place so that you can retrieve them later.
9 Carefully remove the new memory module from its
antistatic packaging, without touching its connectors.
10 Locate an empty memory module slot on the underside of
the computer.
NOTE
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector on the side you insert into the
computer.
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
If no memory slot is available, you must remove a module by
performing steps 2-3 of
page 63.
"Removing a memory module" on