Removing A Disc; Caring For Cd Or Dvd Discs - Toshiba Qosmio G35-AV650 Series User Manual

112
Learning the Basics
Using the HD DVD-ROM and DVD Super Multi-drive (double
layer) (optical drive)

Removing a disc

NOTE
1 Locate and press the eject button.
The disc partially ejects from the slot.
2 Grasp the disc and remove it from the computer, then
place the disc in its protective cover.

Caring for CD or DVD Discs

Store your discs in their original containers to protect
them from scratches and keep them clean.
Do not bend a disc or place heavy objects on top of it.
Do not apply a label to or otherwise mar the surface of a
disc.
Hold a disc by its outside edge. Fingerprints on the
surface can prevent the optical drive from reading the
data properly.
Do not expose discs to direct sunlight or extreme heat or
cold.
To clean a disc that is dirty, wipe it with a clean, dry
cloth. The most efficient method to clean it is to start
from the center of the disc and wipe toward the outward
edge (not in a circle). If necessary, moisten the cloth with
water or a neutral cleaner (not benzine or rubbing
alcohol). Let the disc dry completely before inserting it in
the drive.
Do not press the eject button or turn off the computer while the
in-use indicator light is glowing. Doing so could damage the
disk or the drive.
The computer must be powered on to eject a disc.