272
Using the RAID-0 or RAID-1 Utility
Creating a new RAID-0 array
NOTE
To create a RAID-0 array:
1
Plug in the AC adapter and power on the computer. (The
computer must be running on power provided by the AC
adapter to perform these steps.)
2
Insert the Recovery DVD shipped with your computer
into the computer's CD/DVD drive.
3
Press F12 to display the boot menu.
4
Press the right arrow key until the CD icon is highlighted;
then, press Enter.
Your computer can only be configured for one type of RAID at
a time. It cannot be configured to use both RAID-0 and RAID-1
simultaneously.