Advertisement
DESCRIPTION
The heavy-duty electric heater is designed for garages, workshops and similar locations. It
features
three
heat settings, for a maximum heat production of 17,065 BTU per hour. It
includes horizontal and vertical air flow and a built-in thermostat with overheating safety
thermal cut-out.
SPECIFICATIONS
Rating
VOLTAGE
5000W III
4000W II
3000W I
G
ENERAL SAFETY INFORMATION
:
WARNING:
this product must be carried out by a certified electrician and in accordance with all local and
national electrical codes.
NOTE: Compatible with a 240V line voltage double pole wall thermostat. This heater must be
installed by a certified electrician.
WARNING:
operating this unit. Observe all safety instructions.
1. Use only copper wires rated for at least 75ºC.
2.
Heater airflow must be directed parallel to or away from adjacent wall.
3.
Observe wall, floor and ceiling clearance requirements.
4. All wiring must be done according to national and local electrical codes in the United
States. The heater must be grounded as a precaution against possible electrical shock.
Heater circuit must be protected with proper fuses.
5. The mounting structure and the anchoring hardware must be capable of supporting
the weight of the heater and the mounting bracket (if used).
6. All electrical power must be disconnected and the main service box, which must be
locked before connecting, inspecting, cleaning or servicing the heater. This is a
precaution to prevent serious electric shock.
7. This heater is not suitable for use in hazardous locations as defined by the national
fire protection association (NFPA) in the United States. This heater has hot and arcing
sparking parts inside. Do not use it in areas where gasoline paint or flammable liquids
are used or stored.
8. This heater is not suitable for use in corrosive atmospheres such as marine
greenhouses or chemical storage areas.
9. The heater must be mounted at least 8 feet above the floor.
Improper installation or failure to follow the procedures outlined in this
WARNING:
instruction manual can result in serious electrical shock.
AMPS
240V
20.9A
240V
16.7A
240V
12.5A
: This heater requires hard-wire installation (no plug). The installation of
:
Read and understand all installation and operation instructions prior to
BTU/hour
17,065
14,105
11,285
Hide quick links:
Advertisement
