And (When Using As Tl Key) - Sharp XE-A113 Instruction Manual

Function parameters for
To program "0" for all items
1
* ABC
To program for another key
*1:Item:
A Footer printing*
B Amount tendered entry*
C Entry digit limit
*When programming for
Footer printing (only for
• This programming decides whether or not the machine should print a message at the foot of a receipt when a
specified media key is used. With regard to programming method of footer logo message, refer to "Logo
messages" section on page 22.
Amount tendered entry (only for
• You may select amount tendered, compulsory or optional, for the
• You may select amount tendered, compulsory or inhibited, for the
Entry digit limit
X Y c
• For the , ,
A
the key, program upper limit entry for total cash amount which can be handled on the register. The
entry digit limit is in effect for REG mode operation but can be overridden in the MGR mode. The entry digit
limit is represented by the number of allowable digits for the maximum entry or total amount. When "0" is set,
the operation of the corresponding key is prohibited.
Key operation example
48
r
,
2
*
@ s
,
s
2
* :Press
r R
or , always enter 0 for A and B.
X Y c b
, , ,
X Y
, ,
b r R
, , and keys program upper limit entry amount for the tendered amount. For
@
018
X A
R X Y c
, , , ,
X Y c b
, , ,
key for TL key setting.
Selection:
Allow
Disallow*
Compulsory
Non-compulsory (for
c b
Inhibit (for and
X Y c b
For , , ,
r R
For and
A
and )
c b A
, and )
b A
and
(when using as TL key)
r R
,
or
Entry:
1
0
1
X Y A
, and )* 0
)* 0
A
and 0-8 (default:8)
0-9 (default:9)
A X Y
, and keys.
c b
and keys.
Print
A
From left, ABC