Various Function Selection Programming 2; Power Save Mode - Sharp XE-A113 Instruction Manual

Job code: 70
* Item:
A Always enter 0.
B Printing data on EJ Z report
C Always enter 0.
D Always enter 0.
E Always enter 0.
F Always enter 0.
G Always enter 0.
H Always enter 0.
Printing data on EJ Z report
• Select "No" to issue an EJ Z report without printing the journal data on it.

Various Function Selection Programming 2

3
The cash register provides various options so you can use the register to suit your sales needs.
In this section, you can program the following features (parameters within parentheses indicate default setting):
• Power save mode (entering the power save mode after 30 minutes)
• Logo message print format (Header 3-line message and footer 3-line message)
• Thermal printer density (standard density)
• Training clerk specification (none) - If you specify a clerk number who is trained for use on this cash register,
the cash register will go into training mode when the clerk is signed on for sales entries. The sales operations
done by the trained clerk do not affect sales totals. For details, refer to TRAINING MODE section.

Power save mode

s
* Item:
A Entering power save mode
when time is displayed
B-D Time(min.) to entering power save mode
since no operation is made
When 999 is set for B to D, entering into power save mode is inhibited.
Key operation example
60
10
s @
10
s A
0060
Selection:
Yes*
No
@
*ABCD
Selection:
Yes*
No
Entry:
0
1
0
0
0
0
0
0
0
s
Entry:
0
1
001-254 or 999
(Default 030)
Print
A