Panasonic FX-502 Series Instruction Manual page 3

For the threshold value fine adjustment function, refer to "
VALUE FINE ADJUSTMENT FUNCTION"
THRESHOLD VALUE FINE ADJUSTMENT FUNCTION
8
output mode and forced OFF output mode.
For setting of the sensing output, refer to <PRO6> in "PRO MODE OPERA-
TION MANUAL."
Press down Press down
UP / DOWN key SET key
<Window comparator mode or Hysteresis mode>
When setting sensing output to the window comparator mode or hysteresis
mode, " " and " " can be changed to another by pressing down
SET key for 2 sec.
down UP key or Down key, and "
Press down
Press down
UP / DOWN key
UP / DOWN key
Note: It may not respond when values of "
KEY LOCK FUNCTION
9
The key lock function prevents key operations so that the conditions set in
each setting mode are not inadvertently changed.
If operating key switch after key lock is set, "
digital display.
Press down for
3 sec. or more
Press down for
3 sec. or more
,
are displayed
10 SENSING OUTPUT OPERATION MODE
When MODE indicator: L / D (yellow) lights up, sensing output operation can be set.
Press down
UP / DOWN key
11 CUSTOM MODE
When MODE indicator: CUST (yellow) lights up,
Response time setting, Emission power setting
or Hysteresis setting can be displayed.
For the setting procedure, refer to <PRO5> in
"PRO MODE OPERATION MANUAL."
By pressing UP key or DOWN key, the setting in
each item will be changed.
For setting of each item, refer to the following table.
Item Digital display
Response time setting
Emission power setting
Hysteresis setting
8 THRESHOLD
Automatically set without pressing
down SET key in approx. 2 sec.
" or "
" or " " are displayed. Then, the
Press down
SET key
Automatically set without pressing
down SET key in approx. 2 sec.
" and " " are close because of relation of hysteresis. Be sure
" is indicated on the
Automatic
Automatic
Press down
SET key
SET key
UP key
MODE indicator
Reference item
<PRO 1: Response time setting>
<PRO 1: Emission power setting>
<PRO 1: Hysteresis setting>
12 PRO MODE
When MODE indicator: PRO (yellow) lights up, PRO mode can be set.
For detail of PRO mode, refer to " PRO MODE OPERATION MANUAL."
UP (+) key (select)
Procedure
<PRO1>
", press
<PRO2>
<PRO3>
+, -
<PRO4>
<PRO5>
DOWN key
MODE key
<PRO6>
<PRO7>
DOWN (-) key (select)
MODE key
SET
Responce time setting
+, -
Timer setting
+, -
Hysteresis setting
+, -
+, -
Shift amount setting
+, -
+, -
Emission power setting
+, -
Timer range setting
SET
Teaching lock setting
+, -
Setting items in digital display setting
+, -
Setting of digital display turning
+, -
+, -
+, -
ECO setting
+, -
Time period hold setting
SET
Data bank loading setting
+, -
Data bank saving setting
+, -
+, -
Back up setting
+, -
+, -
Input / output setting
SET
Copy setting
+, -
Copy action setting
+, -
Copy lock setting
+, -
+, -
+, -
Communication protocol setting
+, -
External input setting
SET
Code setting
+, -
Display adjustment setting
+, -
Reset setting
+, -
+, -
+, -
CUSTOM setting
+, -
Interference prevention setting
SET
Sensing output setting
+, -
SET
Logic operation setting
+, -
Setting of threshold value tracking