Check The Machine - Sharp MX-M310 Online Manual

6 TROUBLESHOOTING
Printing does not take place

Check the machine

■ Power switch on?
Turn the power switch on. (See "POWER ON AND OFF" in
the operation manual)
■ Is the machine online?
When the ON LINE indicator next to the [PRINT] key on the
operation panel is lit, the machine is online and ready to
print. If the ON LINE indicator is off, press the [PRINT] key
and then touch the [ONLINE] key. (When [ONLINE] is
highlighted, the machine is online.)
COPY
ON LINE
PRINT
DATA
DATA
SCAN
LINE
FAX
DATA
■ Has an error occurred such as a paper misfeed, staple
jam in the finisher, out of paper, or out of toner?
When one of the above errors occurs, a message will appear
in the touch panel to alert you.
Follow the instructions in the message to clear the error.
Printing will automatically resume when the error is cleared.
For information on handling errors, see "TROUBLESHOOTING"
in operation manual.
CO NT E N TS
■ Copy job being performed?
■ Is the "I/O TIMEOUT" setting too short?
ONLINE
If a Notice Page is printed, see
OFFLINE
1/1
BYPASS TRAY
CONDITION
SETTINGS
Wait until copying is finished. You can also select the key of
the job that you wish to print in the job status screen and then
touch the [PRIORITY] key. Copying will be interrupted and
the selected job printed.
☞
Giving priority to a print job
Set a longer time for "I/O TIMEOUT" in the system settings
(administrator) (see "I/O TIMEOUT" in the "SYSTEM
SETTINGS (ADMINISTRATOR)" in the operation manual).
(part 3)
"If a notice page is printed".
70