Printer Condition Settings - Sharp MX-M310 Online Manual

5 OPERATION AT THE MACHINE
Configuring the printer condition settings

Printer condition settings

Factory default settings are indicated in bold.
DEFAULT SETTINGS
Item
TONER SAVE
COPIES
ORIENTATION
DEFAULT PAPER
SIZE
DEFAULT PAPER
SOURCE
DEFAULT PAPER
TYPE
CO NT E N TS
Selections
Enabled, Disabled (no This enables or disables toner save mode. Toner save mode conserves toner
checkmark) by printing a slightly lighter image.
1 - 999 This is used to select the number of copies.
PORTRAIT, This sets the orientation of the printed page. Select "PORTRAIT" when the
LANDSCAPE image is longer in the vertical direction, or "LANDSCAPE" when the image is
longer in the horizontal direction.
5 ½ x 8 ½, 8 ½ x 11, 8 This sets the default paper size used for the printed image. Even if the set size
½ x 13, 8 ½ x 14, 11 x of paper is not in any of the trays, the printed image is formed in accordance
17, A5, B5, A4, B4, A3 with this setting.
*Factory default setting is A4 in some regions.
AUTO, Set the default paper tray. When set to "AUTO", the paper tray with the size of
BYPASS (MANUAL), paper set in "DEFAULT PAPER SIZE" is automatically selected.
BYPASS (AUTO), *Selections available depend on the trays that are installed.
TRAY 1,
TRAY 2,
TRAY 3*,
TRAY 4*
AUTO, PLAIN, This is used to select the default paper type. When set to "AUTO", the paper
RECYCLED, LETTER tray with the size of paper set in "DEFAULT PAPER SIZE" is automatically
HEAD, COLOR selected.
Description
(part 4)
(continued)
61