IBM 4684 Store Loop Adapter/A Manual page 16

3.1 Configuration and Verification Tests
1. Insert the backup copy of the 4684 Reference Diskette, Version 3.0 or
higher, in the 4684 diskette drive and switch power ON.
instructions that appear on the screen.
If the 4684 terminal stops with message "165" displayed, press the S1
or the ESC key. Then, follow the instructions on the display.
2. When message "M0101" is displayed, answer YES.
configuration will begin.
3. When the question "Do you want to activate the new configuration now?"
is displayed, answer YES, and follow the instructions on the screen.
PICTURE 9
4. When Menu-M1 is displayed, select "Start Tests".
5. When Menu-T1 is displayed, select "Verification Tests".
The verification tests check the memory, the display, the IBM 4684
Store Loop Adapter/A, and other components of the system.
If an error occurs, make note of any components that fail the
tests, and record any messages.
6. When testing is complete, be sure to connect the store loop cables to
the proper store loop receptacles.
4684 Store Loop Adapter/A
Configuration and Verification Tests
Automatic
¦ Copyright IBM Corp. 1991
3.1 - 1
Follow the