Advertisement
Operation
4.
Switching on the heater. By pressing the main switch ON / OFF the heater is
activated. After switching on, the main switch illuminates and the indicator "ON / Status"
lights to confirm the heater operation.
5.
Switching off the heater. By pressing the main switch ON / OFF again the heater
operation is stopped. After switching off, the lighting of the main switch is also off. The
indicator "ON / Status" goes off after approximately 3 minutes (cooling down of the heater).
6.
Mode selector knob. With the mode selector knob, you can select the desired
functions of your heater by placing the index on the desired symbol.
• "Eco" mode reduces the electrical power consumption by reducing the max. heating
power. Useful when saving the battery is more important than quick heating up.
• In the "Normal" heating the heater behaves like a standard heater.
• "Plus" increases the max. heating power by ~10%. It provides extra power for quicker
heating up.
• In "Ventilation" mode the blower runs but the heater is off.
7.
Temperature selector. You can adjust the desired interior temperature with the
temperature selector. With the yacht 'closed up' experience shows the selector often sits
below the comfort range in air temperatures below Oº C
8.
LED. The status LED lights green in normal heating mode. Blinking indicates failure
code; see the faults section in the manual in the documents folder.
6 - 2
Mar 20
- Quick Links:
- Bilge Pumps
Hide quick links:
Advertisement
