Starting and stopping the engine.
12.
The controls comprise the Electronic Vessel Control (EVC) panel and a tachometer.
a.
Starting.
•
•
displays 'Volvo Penta' and then engine hours run – difficult to see in sunlight)
•
wait for 'two beeps'.
•
•
exhaust
•
b.
Stopping.
•
•
•
Morse to neutral
Press EVC Panel on/off button for 2 secs (Taco screen illuminates,
EVC carries out Built in Test and pre-heating of coils automatically –
(In an emergency, no need to wait for BIT
Press and hold 'Crank' button until engine starts
Check:
no audio alarms; No warnings, water being expelled from
outlet.
Allow engine to warm up
Ensure EVC panel is turned on (Tachometer illuminated)
Press and hold 'Stop' button, until engine stops
Turn panel off
4 - 7
check)
Mar 20