Hallberg-Rassy 34.2 System Manual page 11

240V
3. The 230V consumer unit and water heater isolation switch is located in the starboard
cockpit locker, outboard. They have built in residual current protection – see Safety Manual.
Services are:
•
240V Sockets in saloon, galley and quarter berth
•
Water heater with separate isolation switch
•
Battery charger
•
2 residual current protection devices at 30mA and 10mA
4. Hot Water Supply. The hot water tank (calorifier) is located beneath the sole boards
in the starboard cockpit locker and provides all domestic hot water. Water is heated by a
240V immersion heater when plugged into shore power or by the engine when it has been
running. Access to the Calorifier is shown below:
FWD
1. Starboard cockpit locker sole boards
230V Water Heater Isolation Switch and Consumer Unit
2. Location of thermal cut out switch and Calorifier
3 - 2 Mar 20