Table of Contents
Advertisement
Table of Contents
Introduction
This manual describes the installation and operation of the Dannmar MB-240X Wheel Balancer. The
MB-240X is a computer-based Wheel Balancer that provides fast, accurate Wheel balancing for a wide
variety of Wheels. No internal motor is utilized; Wheels are rotated manually. The Balancer is designed
to accommodate mounting in three different configurations. A Tire Changer mount is shipped with the
Balancer, but an optional mounting stand, and optional wall mount are available.
More information about Dannmar products is available at Dannmar.com.
This manual is mandatory reading for all users
up, operates, maintains, or repairs it.
You can always find the latest version of the
website.
⚠
DANGER
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
Technical support and service for your Wheel Balancer is available from your distributor or by calling
Dannmar at (877) 432-6627. You may also call regarding parts replacement (please have the serial
number and model number of your unit available).
MB-240X Wheel Balancer
3
4
4
6
8
9
10
11
Be very careful when setting up, operating, maintaining, or repairing this equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Do not make modifications
to the unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
of the MB-240X, including anyone who sets
manual for your product on the Dannmar
3
P/N 5900262 - Rev. A1 - Jan. 2021
23
43
44
47
48
51
59
Advertisement
Table of Contents
