Installation Checklist - Dannmar MB-240X Installation And Operation Manual

Installation Checklist

Following are the steps needed to install an MB-240X Wheel Balancer. Perform them in the order
shown.
☐
1. Review the installation Safety Rules.
☐
2. Plan for Electrical Work.
☐
3. Make sure you have the necessary Tools.
☐
4. Select the Installation Site and mounting method. Tire Changer Mount, Mounting Stand, or Wall
Bracket.
☐
5. Verify that there is adequate Clearance on all Sides of the Balancer at the installation site.
☐
6. Gather parts for installation, Mounting Stand (optional), Wall Mount Brackets (optional), or Tire
Changer mount.
☐
7. Unpack the Components.
☐
8. Install the Balancer.
☐
9. Anchor the Balancer.
☐
10. Install the Shaft.
☐
11. Connect to a Power Source,
☐
12. Review the Final Checklist.
MB-240X Wheel Balancer
requires a licensed Electrician for 220 VAC operation
10
P/N 5900262 — Rev. A1 — Jan. 2021
.