Setting The Alarm By Radio Or Audio Player - Tecsun PL-990x Operation Manual

3) While still flashing, rotate the [ TUNING ] knob to set the duration after which
the device turns off (01 - 60 minutes).
4) Quick press [ TIMER A ] to confirm the setting. The alarm "
shown on the display. For setting [ TIMER B ] you can follow the same steps.

Setting the Alarm by Radio or Audio Player

Alarm by radio
●
1) Turn on the device, select the station frequency you want to use as the
alarm.
2) Quick press [ M ], the memory location will flash.
3) While still flashing, quick press [ TIMER A ] or [ TIMER B ], the alarm "
icon starts flashing.
4) While still flashing, quick press [
is completed.
5) Make sure to adjust the volume to an appropriate level.
Alarm by audio player
●
1) Insert a microSD card containing audio files.
2) Enter the audio player mode and select the audio track you want to use as
the alarm.
3) Quick press [ M ], the "
4) While still flashing, quick press [ TIMER A ] or [ TIMER B ], the "
" " icon will flash simultaneously.
5) While still flashing, quick press [
the setting is completed.
6) Make sure to adjust the volume to an appropriate level.
], " " stops flashing and the setting
" icon starts flashing.
], "
23
" and " " stop flashing and
" icon is
"
" and