USING THE DEVICE
Turning the device on/off: Quick press the [ POWER/SLEEP ] button.
Volume control: Rotate the [ VOLUME ] knob upwards or downwards to select
your desired volume level.
Note: Volume control on this device is disabled when feeding audio through the
[ LINE OUT ] socket.
(1) LISTENING TO RADIO
VF (View Frequency) and VM (View Memory)
VF: VF mode is used when searching for new radio signals. Quick press the
[ VF/VM ] button. When the frequency indicator flashes, the VF mode is
activated.
VM: VM mode is used for looking up stations that have been stored into
memory. Quick press the [ VF/VM ] button. When the station memory
indicator in the top right corner of the display flashes, the VM mode is
activated.
Flashing 2 times
Note: When the memory contains no stored stations, it is not possible to
access VM (View Memory) mode.
VF mode
Flashing 3 times
VM mode
9