Troubleshooting; Warranty - Kobalt KXHD 124B-03 Manual

TROUBLESHOOTING

WARNING
Place the direction-of-rotation selector (E) in the center lock position and remove the battery
before performing troubleshooting procedures.
PROBLEM
Tool does not work.
Bit cannot be
installed.
Motor overheating

WARRANTY

For 5 years from the date of purchase, the tool is warranted for the original purchaser to be
free from defects in material and workmanship. This guarantee does not cover damage due
to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use. This warranty is limited to 90 days for commercial and rental use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
Low battery capacity.
Chuck is not released
Bit does not fit the
chuck.
Cooling vents are
obstructed
CORRECTIVE ACTION
Charge the battery pack.
Release the chuck.
Use an appropriate bit or use a suitable
adaptor.
Clean and clear vents. Do not cover vents
with hand during operation
16
Printed in China