Kobalt K18ND-06A Manual
  1. Manuals
  2. Brands
  3. Kobalt Manuals
  4. Drill
  5. K18ND-06A
  6. Manual

Kobalt K18ND-06A Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
KOBALT
and the K & Design
trademarks of LF, LLC. All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Serial Number
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m. - 8 p.m., EST, Monday -
Friday.
®
are registered
Purchase Date
1
ITEM #0325916
18-VOLT NiCd
DRILL/DRIVER
MODEL #K18ND-06A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the K18ND-06A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Kobalt K18ND-06A

Summary of Contents for Kobalt K18ND-06A

  • Page 1 ITEM #0325916 18-VOLT NiCd DRILL/DRIVER MODEL #K18ND-06A ® ® KOBALT and the K & Design are registered trademarks of LF, LLC. All Rights Reserved. ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS 3URGXFW 6SHFL¿FDWLRQV ..............................Safety Information ................................Contents..................................Operating Instructions ..............................Care and Maintenance ............................... Troubleshooting ................................Warranty ..................................PRODUCT SPECIFICATIONS Component 6SHFL¿FDWLRQV Motor 18 Volt D/C Switch VSR (Variable Speed Reversible) No-load speed 0-450/0-1600 RPM Clutch settings 23+1 Chuck capacity 1/2 in.

  • Page 3: Safety Information

    SAFETY INFORMATION c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2) Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor plugs with earthed (grounded) power tools.
  • Page 4 SAFETY INFORMATION 4) Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The FRUUHFW SRZHU WRRO ZLOO GR WKH MRE EHWWHU DQG PRUH VDIHO\ at the rate for which it was designed.
  • Page 5 SAFETY INFORMATION SPECIFIC SAFETY RULES FOR CORDLESS DRILL/DRIVER a) Hold a power tool by the insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
  • Page 6 CONTENTS Cordless drill/driver, bit, belt clip, bit holder PREPARATION KNOW YOUR CORDLESS DRILL/DRIVER (Fig. 1) %HIRUH DWWHPSWLQJ WR XVH WKH GULOOGULYHU IDPLOLDUL]H \RXUVHOI ZLWK DOO RI LWV RSHUDWLQJ IHDWXUHV DQG safety requirements. A. Variable-speed trigger switch B. Direction-of-rotation selector (forward/center lock/reverse) C.

  • Page 7: Operating Instructions

    OPERATING INSTRUCTIONS TO ATTACH BATTERY PACK (Fig. 2) 1. Place the direction-of-rotation selector ( B ) in the center ( locked ) position. 2. Align the raised portion on the battery pack (G) with DETACH the grooves on the bottom of the drill/driver, and then slide the battery pack onto the drill/driver as shown.
  • Page 8 OPERATING INSTRUCTIONS Use 1 for starting holes without a center punch, drilling metals, plastics or ceramics, or in applications that require a higher torque. 2 is better for drilling wood and wood composites and for using abrasive and polishing accessories. NOTE: Never change gears while the tool is running.
  • Page 9 OPERATING INSTRUCTIONS KEYLESS CHUCK (Fig. 6) The drill/driver has a keyless chuck (I) to tighten or UHOHDVH GULOO ELWV LQ WKH FKXFN MDZV 7KH DUURZV RQ WKH chuck indicate the direction in which to rotate the chuck body in order to GRIP (tighten) or OPEN (release) the FKXFN MDZV RQ WKH GULOO ELW WARNING: Do not hold the chuck body with one hand and use the power of the drill/driver to tighten the chuck...
  • Page 10 OPERATING INSTRUCTIONS LED WORK LIGHT (Fig. 9) The LED work light (D), located above the trigger switch ( A ), will illuminate when the trigger switch is depressed. This provides additional light on the surface of the workpiece for operation in lower-light areas. The LED work light will turn off when the trigger switch is released.
  • Page 11 OPERATING INSTRUCTIONS INSTALLING BITS (Fig. 12) 1. Lock the trigger switch by placing the direction-of- rotation selector ( B ) in the OFF (center) position.  2SHQ RU FORVH WKH FKXFN MDZV WR D SRLQW ZKHUH WKH opening is slightly larger than the shank of the bit you intend to use.
  • Page 12 OPERATING INSTRUCTIONS DRILLING (Fig. 15) 1. Check the direction-of-rotation selector for the correct setting (forward or reverse). 2. Secure the material to be drilled in a vise or with clamps to keep it from turning as the drill bit rotates.  +ROG WKH GULOOGULYHU ¿UPO\ DQG SODFH WKH ELW DW WKH SRLQW to be drilled.
  • Page 13 OPERATING INSTRUCTIONS MASONRY DRILLING 1. For maximum performance, use carbide-tipped masonry bits when drilling holes in brick, tile, concrete, etc. 2. Maintain a speed and pressure which will allow cutting without overheating the bit or drill/driver. Applying too much pressure will: - Overheat the drill/driver.

  • Page 14: Care And Maintenance

    OPERATING INSTRUCTIONS 8. To stop the drill/driver, release the trigger switch and allow the tool to come to a complete stop. The electric brake quickly stops the rotation. This feature engages automatically when you release the trigger switch. NOTE: This drill/driver is equipped with an electric brake. When the brake is functioning properly, sparks may be visible through the vent slots in the housing.

  • Page 15: Troubleshooting

    TROUBLESHOOTING WARNING: Turn the switch to the “OFF” position and remove the battery pack from the tool before performing troubleshooting procedures. Problem Possible Cause Corrective Action The drill/driver does not work Battery is depleted Charge the battery Bit cannot be installed Sleeve is not released Release the sleeve %LW GRHV QRW ¿W WKH VOHHYH...
  • Page 16 ITEM #0325916 18-VOLT NiCd CIRCULAR SAW MODEL #K18NC-06A KOBALT ® and the K & Design ® are registered trademarks of LF, LLC. All Rights Reserved. ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m.
  • Page 17 TABLE OF CONTENTS 3URGXFW 6SHFL¿FDWLRQV ..............................Safety Information ................................Contents .................................... Preparation ..................................Operating Instructions ..............................Care and Maintenance ............................... Troubleshooting ................................Warranty ..................................PRODUCT SPECIFICATIONS Component 6SHFL¿FDWLRQV Rated voltage 18V DC No-load speed 4500 RPM 6DZ EODGH VL]H 6-1/2 in. 0 °- 50 °...

  • Page 18: Safety Information

    SAFETY INFORMATION KNOW THE TOOL 7R RSHUDWH WKLV WRRO FDUHIXOO\ UHDG WKLV PDQXDO DQG DOO ODEHOV DI¿[HG WR WKH FLUFXODU VDZ EHIRUH using it. Keep this manual available for future reference. IMPORTANT 7KLV WRRO VKRXOG EH VHUYLFHG RQO\ E\ D TXDOL¿HG VHUYLFH WHFKQLFLDQ READ ALL INSTRUCTIONS THOROUGHLY GENERAL SAFETY RULES FOR ALL POWER TOOLS WARNING: Read all safety warnings and all instructions.
  • Page 19 SAFETY INFORMATION 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a SRZHU WRRO 'R QRW XVH D SRZHU WRRO ZKLOH \RX DUH WLUHG RU XQGHU WKH LQÀXHQFH RI drugs, alcohol or medication. A moment of inattention while operating power tools may UHVXOW LQ VHULRXV SHUVRQDO LQMXU\ b) 8VH SHUVRQDO SURWHFWLYH HTXLSPHQW $OZD\V ZHDU H\H SURWHFWLRQ Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection, used for...
  • Page 20 SAFETY INFORMATION g) Use the power tool, accessories, tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result LQ D KD]DUGRXV VLWXDWLRQ 5) Battery tool use and care a) 5HFKDUJH RQO\ ZLWK WKH FKDUJHU VSHFL¿HG E\ WKH PDQXIDFWXUHU A charger that is...
  • Page 21 SAFETY INFORMATION Further safety instructions for all saws Cause and operator prevention of kickback: - Kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator. - When the blade is pinched or bound tightly by the kerf closing down, the blade stalls and the motor reaction drives the unit rapidly back toward the operator.

  • Page 22: Contents

    SAFETY INFORMATION c) The lower guard should be retracted manually only for special cuts, such as “plunge cuts” and “compound cuts.” Raise the lower guard with the retracting handle and, as soon as blade enters the material, the lower guard must be released. For all other sawing, the lower guard should be allowed to operate automatically.

  • Page 23: Preparation

    PREPARATION...
  • Page 24 PREPARATION KNOW YOUR CIRCULAR SAW (Fig. 1) %HIRUH DWWHPSWLQJ WR XVH WKH FLUFXODU VDZ IDPLOLDUL]H \RXUVHOI ZLWK DOO RI LWV RSHUDWLQJ IHDWXUHV DQG safety requirements.) Trigger switch Motor housing Main handle Auxiliary handle Bevel locking knob 0°- 50° bevel scale Edge-guide locking knob Blade-guard lever Lower blade guard...

  • Page 25: Operating Instructions

    OPERATING INSTRUCTIONS VARIABLE-SPEED TRIGGER SWITCH (Fig. 2) Your saw is equipped with a trigger switch (A) to turn the saw on and off, and to control the speed. 1. To start the saw, depress the lock-off button (S) and WKHQ VTXHH]H WKH WULJJHU VZLWFK 2.
  • Page 26 OPERATING INSTRUCTIONS INSTALLING A SAW BLADE (Fig. 4) 1. Remove the battery pack ( W ) from the saw. 2. Depress and hold the spindle-lock button ( O ). 3. While keeping the spindle-lock button depressed, remove the blade bolt ( Q ) by turning it clockwise with the blade wrench (included).
  • Page 27 OPERATING INSTRUCTIONS BLADE GUARD SYSTEM (Fig. 5) The lower blade guard (I) on the circular saw is there for the operator’s protection and safety. Do not alter it for any reason. a cut If the lower blade guard becomes damaged or if the blade begins to run slowly or sluggishly, DO NOT operate the saw until the damaged part has been repaired or replaced.
  • Page 28 OPERATING INSTRUCTIONS DEPTH-OF-CUT ADJUSTMENT (Fig. 7) WARNING: Always maintain the correct blade-depth setting. The correct blade-depth setting for all cuts should not exceed the thickness of the material being cut by more than 1/4 in. (6.5 mm). Greater blade depth will increase the chance of kickback, and cause the cut to be rough.
  • Page 29 OPERATING INSTRUCTIONS CUTTING WITH THE CIRCULAR SAW 5HIHU WR WKH ¿JXUHV LQ WKLV VHFWLRQ WR OHDUQ WKH FRUUHFW and incorrect ways of handling the saw. WARNING: To make sawing easier and safer, always maintain proper control of the saw. Loss of control could FDXVH DQ DFFLGHQW UHVXOWLQJ LQ VHULRXV LQMXU\ DANGER: When lifting the saw from the workpiece, the blade is exposed on the underside of the saw until...
  • Page 30 OPERATING INSTRUCTIONS Cross-cutting/rip cutting (Fig. 12-13) When making a cross-cut or a rip cut, align the guideline with the blade-guide notch ( T ) on the base, as shown in Fig. 12. The distance from the saw blade to the saw base is approximately 1-1/2 in.
  • Page 31 OPERATING INSTRUCTIONS  +ROG WKH VDZ ¿UPO\ ZLWK ERWK KDQGV DV VKRZQ 5. Rest the front edge of the base on the workpiece without touching the blade to the workpiece. 6. Start the saw and allow the blade to reach full speed. 7.

  • Page 32: Care And Maintenance

    CARE AND MAINTENANCE $OO PDLQWHQDQFH VKRXOG RQO\ EH FDUULHG RXW E\ DQ DXWKRUL]HG VHUYLFH RUJDQL]DWLRQ Cleaning Before cleaning or performing any maintenance, remove the battery pack from the tool. For safe and proper operation, always keep the tool and its ventilation slots clean. Always use only a soft, dry cloth to clean your circular saw;...
  • Page 33 ITEM #0325916 18-VOLT NiCd RECIPROCATING SAW MODEL #K18NR-06A ® ® KOBALT and the K & Design are registered trademarks of LF, LLC. All Rights Reserved. ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m.
  • Page 34 TABLE OF CONTENTS 3URGXFW 6SHFL¿FDWLRQV ............2 Safety Information .

  • Page 35: Safety Information

    SAFETY INFORMATION KNOW THE TOOL 7R RSHUDWH WKLV WRRO FDUHIXOO\ UHDG WKLV PDQXDO DQG DOO ODEHOV DI¿[HG WR WKH UHFLSURFDWLQJ VDZ EHIRUH using it. Keep this manual available for future reference. IMPORTANT 7KLV WRRO VKRXOG EH VHUYLFHG RQO\ E\ D TXDOL¿HG VHUYLFH WHFKQLFLDQ READ ALL INSTRUCTIONS THOROUGHLY GENERAL SAFETY RULES FOR ALL POWER TOOLS WARNING: Read all safety warnings and all instructions.
  • Page 36 SAFETY INFORMATION 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a SRZHU WRRO 'R QRW XVH D SRZHU WRRO ZKLOH \RX DUH WLUHG RU XQGHU WKH LQÀXHQFH RI drugs, alcohol or medication. A moment of inattention while operating power tools may UHVXOW LQ VHULRXV SHUVRQDO LQMXU\ b) 8VH SHUVRQDO SURWHFWLYH HTXLSPHQW $OZD\V ZHDU H\H SURWHFWLRQ Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection, used for...
  • Page 37 SAFETY INFORMATION g) Use the power tool, accessories, tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result LQ D KD]DUGRXV VLWXDWLRQ 5) Battery tool use and care a) 5HFKDUJH RQO\ ZLWK WKH FKDUJHU VSHFL¿HG E\ WKH PDQXIDFWXUHU A charger that is...

  • Page 38: Contents

    SAFETY INFORMATION Always wear safety goggles or eye protection when using this tool. Use a dust mask or respirator or connect the tool to an external dust vacuum if cutting generates a great amount of dust. Keep hands away from cutting area. Do not reach under the material being cut. The proximity of the blade to your hand is hidden from your sight.

  • Page 39: Preparation

    PREPARATION KNOW YOUR RECIPROCATING SAW (Fig. 1) %HIRUH DWWHPSWLQJ WR XVH WKH UHFLSURFDWLQJ VDZ IDPLOLDUL]H \RXUVHOI ZLWK DOO RI LWV RSHUDWLQJ IHDWXUHV and safety requirements. A. Saw blade B. Pivoting shoe C. Trigger switch D. Lock-off button E. Blade-clamp lever F.

  • Page 40: Operating Instructions

    OPERATING INSTRUCTIONS TO ATTACH BATTERY PACK (Fig. 2) 1. Ensure that the trigger switch is in the “off” position. 2. Align the raised rib on the battery pack ( G ) with the grooves on the bottom of the saw, and then attach the battery pack to the saw.
  • Page 41 OPERATING INSTRUCTIONS BASE SHOE ADJUSTMENT (Fig. 4) For maximum control and longer blade life, the base DVVHPEO\ VOLGHV LQ RU RXW WR DGMXVW WKH HIIHFWLYH VWURNH length. 1. Remove the battery pack from the saw. 2. Open and hold the shoe-release lever ( F ), then slide the shoe ( B ) to the desired position.
  • Page 42 OPERATING INSTRUCTIONS GENERAL CUTTING (Fig. 7) WARNING: Before attaching the battery pack to the tool, always check to determine that the switch performs properly and returns to the “OFF” position when released. WARNING: Hold the tool only by the plastic handle and the insulated grip area to help prevent electrical shock.
  • Page 43 OPERATING INSTRUCTIONS PLUNGE CUTTING (Fig. 8) Your reciprocating saw is ideal for plunge cutting directly into surfaces that cannot be cut from an edge, such as ZDOOV RU ÀRRUV 3OXQJH FXWWLQJ PD\ EH SHUIRUPHG WZR ways, depending on how the blade is inserted. Column A shows how to plunge cut with the teeth of the blade facing down.

  • Page 44: Care And Maintenance

    OPERATING INSTRUCTIONS METAL CUTTING The saw can be used to cut metals, such as sheet steel, pipe, steel rods, aluminum, brass, and copper. Be careful not to twist or bend the saw blade. Do not force the tool. The use of cutting oil is recommended when cutting soft metals and steel. Cutting oil will keep the blade cool, increase cutting action, and prolong blade life.
  • Page 45 5-YEAR HASSLE-FREE WARRANTY This reciprocating saw is warranted to the original purchaser from the original purchase date for ¿YH  \HDUV VXEMHFW WR WKH ZDUUDQW\ FRYHUDJH GHVFULEHG KHUHLQ This reciprocating saw is warranted for the original user to be free from defects in material and workmanship.
  • Page 46 ITEM #0325916 18-VOLT NiCd WORK LIGHT MODEL #K18NL-06A ® ® KOBALT and the K & Design are registered trademarks of LF, LLC. All Rights Reserved. ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m.

  • Page 47: Warranty

    TABLE OF CONTENTS 3URGXFW 6SHFL¿FDWLRQV ..............................Safety Information ................................Preparation ..................................Operating Instructions ..............................Care and Maintenance ..............................Troubleshooting ................................Warranty ................................... PRODUCT SPECIFICATIONS Component 6SHFL¿FDWLRQV Rated voltage 18V D/C Rated power input 9 +] Head pivot 90° Run-time > 2 hours Replacement bulb 18V 0.3A...

  • Page 48: Safety Information

    SAFETY INFORMATION KNOW THE TOOL 7R RSHUDWH WKLV WRRO FDUHIXOO\ UHDG WKLV PDQXDO DQG DOO ODEHOV DI¿[HG WR WKH ZRUN OLJKW EHIRUH XVLQJ LW Keep this manual available for future reference. IMPORTANT 7KLV WRRO VKRXOG RQO\ EH VHUYLFHG E\ D TXDOL¿HG VHUYLFH WHFKQLFLDQ READ ALL INSTRUCTIONS THOROUGHLY GENERAL SAFETY RULES FOR ALL POWER TOOLS WARNING: Read all safety warnings and all instructions.
  • Page 49 SAFETY INFORMATION 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operating a SRZHU WRRO 'R QRW XVH D SRZHU WRRO ZKLOH \RX DUH WLUHG RU XQGHU WKH LQÀXHQFH RI drugs, alcohol or medication. A moment of inattention while operating power tools may UHVXOW LQ VHULRXV SHUVRQDO LQMXU\ b) 8VH SHUVRQDO SURWHFWLYH HTXLSPHQW $OZD\V ZHDU H\H SURWHFWLRQ Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection, used for...
  • Page 50 SAFETY INFORMATION 5) Battery tool use and care a) 5HFKDUJH RQO\ ZLWK WKH FKDUJHU VSHFL¿HG E\ WKH PDQXIDFWXUHU A charger that is VXLWDEOH IRU RQH W\SH RI EDWWHU\ SDFN PD\ FUHDWH D ULVN RI ¿UH ZKHQ XVHG ZLWK DQRWKHU battery pack. b) 8VH SRZHU WRROV RQO\ ZLWK VSHFL¿FDOO\ GHVLJQDWHG EDWWHU\ SDFNV Use of any other EDWWHU\ SDFNV PD\ FUHDWH D ULVN RI LQMXU\ DQG ¿UH c) When a battery pack is not in use, keep it away from other metal objects, such as...

  • Page 51: Preparation

    PREPARATION KNOW YOUR WORK LIGHT (Fig. 1) %HIRUH DWWHPSWLQJ WR XVH WKH ZRUN OLJKW IDPLOLDUL]H \RXUVHOI ZLWK DOO RI LWV RSHUDWLQJ IHDWXUHV DQG safety requirements. A. On/Off Switch B. 5HÀHFWRU C. Front cover D. Head E. Handle F. Battery-release button G.

  • Page 52: Operating Instructions

    OPERATING INSTRUCTIONS TO ATTACH BATTERY PACK (Fig. 2) 1. Align the raised portion on the battery pack ( G ) with the grooves on the bottom of the work light, and then DETACH slide the battery pack onto the work light as shown. 2.

  • Page 53: Care And Maintenance

    CARE AND MAINTENANCE $OO PDLQWHQDQFH VKRXOG RQO\ EH FDUULHG RXW E\ DQ DXWKRUL]HG VHUYLFH RUJDQL]DWLRQ Cleaning Before cleaning or performing any maintenance, remove the battery pack from the tool. For safe and proper working, always keep the tool and its ventilation slots clean. Always use only a soft, dry cloth to clean your work light, never use any detergent or alcohol.
  • Page 54 ITEM #0005667 NiCd 18-VOLT BATTERY PACK MODEL #K18-NB15A ® ® KOBALT and the K & Design are registered trademarks of LF, LLC. All Rights Reserved. ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at...

  • Page 55: Component

    TABLE OF CONTENTS 6SHFL¿FDWLRQV«««««««««««««««««««. 2 6DIHW\ ,QIRUPDWLRQ«««««««««««««««««««. 3 Contents..................6 3UHSDUDWLRQ««««««««««««««««««««««. 7 2SHUDWLQJ,QVWUXFWLRQV«««««««««««««««««. 8 &DUH DQG 0DLQWHQDQFH««««««««««««««««« :DUUDQW\«««««««««««««««««««««««...11 SPECIFICATIONS COMPONENT SPECIFICATIONS Rated voltage 18V D/C Rated power input 9  +] Battery type NiCd...
  • Page 56 SAFETY INFORMATION Carefully read this manual and all labels affixed to the battery pack before using. Keep this manual available for future reference. IMPORTANT 7KLV EDWWHU\ SDFN VKRXOG RQO\ EH VHUYLFHG E\ D TXDOL¿HG VHUYLFH technician. READ ALL INSTRUCTIONS THOROUGHLY. GENERAL SAFETY RULES FOR ALL POWER TOOLS WARNING: Read all safety warnings and all instructions.
  • Page 57 SAFETY INFORMATION Electrical safety ‡ Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. ‡ Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
  • Page 58 SAFETY INFORMATION SPECIFIC SAFETY RULES FOR BATTERY PACK ‡ Use battery only with the charger listed. BATTERY PACK CHARGER K18NC-15A 0005667 0352551 ‡ Know your power tool. Read the operator’s manual carefully. Learn the tool’s applications and limitations, DV ZHOO DV WKH VSHFL¿F SRWHQWLDO KD]DUGV UHODWHG WR WKLV tool.
  • Page 59 SAFETY INFORMATION ‡ Do not charge the battery in a damp or wet location. Following this rule will reduce the risk of electric shock. ‡ For best results, your battery should be charged in a location where the temperature is greater than 41° F (5°...
  • Page 60 PACKAGE CONTENTS PART DESCRIPTION QUANTITY Battery release button Electrical contacts Battery vents PREPARATION KNOW YOUR BATTERY PACK %HIRUH DWWHPSWLQJ WR XVH WKH EDWWHU\ SDFN IDPLOLDUL]H \RXUVHOI with all of its operating features and safety requirements.
  • Page 61 WARNING: Do not allow familiarity with the battery pack to cause carelessness. Remember that one careless moment is HQRXJK WR FDXVH VHYHUH LQMXU\ %HIRUH DWWHPSWLQJ WR XVH DQ\ WRRO be sure to become familiar with all of the operating features and safety instructions.
  • Page 62 OPERATING INSTRUCTIONS HOW TO CHARGE THE BATTERY PACK (Fig. 2) A fully discharged battery pack will charge about 60 minutes in a surrounding temperature between 41° F (5° C) and 104° F (40° C). ‡ Charge the battery pack with the correct charger. ‡...
  • Page 63 CARE AND MAINTENANCE All maintenance should only be carried out only by an DXWKRUL]HG VHUYLFH RUJDQL]DWLRQ Before cleaning or performing any maintenance, remove the battery pack from the tool. For safe and proper operation, always keep the tool and its ventilation slots clean. Always use only a soft, dry cloth to clean your battery pack;...
  • Page 64 3-YEAR HASSLE-FREE WARRANTY This battery pack is warranted to the original purchaser from the RULJLQDO SXUFKDVH GDWH IRU WKUHH  \HDUV VXEMHFW WR WKH ZDUUDQW\ coverage described herein. This battery pack is warranted for the original user to be free from defects in material and workmanship.
  • Page 65 ITEM #0325916 18-VOLT NiCd CHARGER MODEL #K18-NC15A ® KOBALT is a registered trademark of LF, LLC. All Rights Reserved ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m.
  • Page 66 TABLE OF CONTENTS 3URGXFW 6SHFL¿FDWLRQV«««««««««««««« 6DIHW\,QIRUPDWLRQ««««««««««««««««««« Contents..................10 Preparation««««««««««««««««««««««11 2SHUDWLQJ ,QVWUXFWLRQV««««««««««««««««« Care and Maintenance«««««««««««««««««14 Warranty«««««««««««««««««««««««.15 PRODUCT SPECIFICATIONS COMPONENTS SPECIFICATIONS  YROWV  +] $& RQO\ Charger input max 60W Charging output 18V D/C Charging time 1 hour Optimum charging temperature 41°F (5°C) - 104°F (40°C) Compatible battery 18V NiCd K18NB-15A Note: For use with 18V NiCd battery only.
  • Page 67 SAFETY INFORMATION KNOW THE TOOL To operate this tool, carefully read this manual and all labels DI¿[HG to the tool before using it. Keep this manual available for future reference. IMPORTANT 7KLV WRRO VKRXOG RQO\ EH VHUYLFHG E\ D TXDOL¿HG VHUYLFH WHFKQLFLDQ READ ALL INSTRUCTIONS THOROUGHLY GENERAL SAFETY RULES FOR ALL POWER TOOLS WARNING: Read all safety warnings and all instructions.
  • Page 68 SAFETY INFORMATION Electrical safety: ‡ Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor plugs with earthed (grounded) power tools. 8QPRGL¿HG SOXJV DQG matching outlets will reduce the risk of electric shock. ‡...
  • Page 69 SAFETY INFORMATION Personal safety: ‡ Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power WRRO ZKLOH \RX DUH WLUHG RU XQGHU WKH LQÀXHQFH RI GUXJV alcohol or medication. A moment of inattention while RSHUDWLQJ SRZHU WRROV PD\ UHVXOW LQ VHULRXV SHUVRQDO LQMXU\ ‡...
  • Page 70 SAFETY INFORMATION Power tool use and care: ‡ Do not force the power tool. Use the correct power tool for your application. 7KH FRUUHFW SRZHU WRRO ZLOO GR WKH MRE better and more safely at the rate for which it was designed. ‡...
  • Page 71 SAFETY INFORMATION Battery tool use and care: ‡ 5HFKDUJH RQO\ ZLWK WKH FKDUJHU VSHFL¿HG E\ WKH manufacturer. A charger that is suitable for one type RI EDWWHU\ SDFN PD\ FUHDWH D ULVN RI ¿UH ZKHQ XVHG ZLWK another battery pack. ‡...
  • Page 72 SAFETY INFORMATION SPECIFIC SAFETY RULES FOR CHARGER WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, ¿UH DQGRU VHULRXV SHUVRQDO LQMXU\ ‡ Before using the battery charger, read all instructions and cautionary markings in this manual and on the battery charger, also read all the instructions in the manuals and the cautionary markings on the battery, and the product using...
  • Page 73 SAFETY INFORMATION ‡ Keep the cord and charger away from heat to prevent damage to the housing or internal parts. ‡ Do not allow gasoline, oils, petroleum-based products, etc., to come in contact with plastic parts. These materials contain chemicals that can damage, weaken, or destroy plastic. ‡...
  • Page 74 SAFETY INFORMATION ‡ Unplug the charger from the electrical outlet before attempting any maintenance or cleaning to reduce the risk of electric shock. ‡ Disconnect charger from the power supply when not in use. This will reduce the risk of electric shock or damage to the charger if metal items should fall into the opening.
  • Page 75 PREPARATION %HIRUH DWWHPSWLQJ WR XVH WKH FKDUJHU IDPLOLDUL]H \RXUVHOI ZLWK DOO of its operating features and safety requirements. A. Electric contacts B. Green LED light C. Red LED light D. Air vents WARNING: Do not allow familiarity with the charger to cause carelessness.
  • Page 76 OPERATING INSTRUCTIONS Note: This battery pack is shipped partially charged. Before using LW WKH ¿UVW WLPH IXOO\ FKDUJH WKH EDWWHU\ SDFN Note: For best performance, fully charge and fully discharge the battery for each cycle. A fully discharged battery pack will charge about 60 minutes when the surrounding temperature is between 41°F (5°C) and 104°F (40°C).
  • Page 77 OPERATING INSTRUCTIONS 5. After charging is complete, the green LED light (B) on the FKDUJHU ZLOO LOOXPLQDWH ZLWKRXW ÀDVKLQJ 6. The battery pack will fully charge but not overcharge if left on the charger. LED DISPLAY RED LED GREEN LED MEANING BATTERY IS FLASHING...
  • Page 78 OPERATING INSTRUCTIONS CHARGING A COLD BATTERY PACK If the battery pack is below the normal temperature range, the red LED light (C) will illuminate and the green LED light (B) will be off. When the battery warms to a temperature of more than 37°F (3°C), the charger will automatically begin charging the battery.
  • Page 79 3-YEAR HASSLE-FREE WARRANTY This charger is warranted to the original purchaser from the RULJLQDO SXUFKDVH GDWH IRU WKUHH  \HDUV VXEMHFW WR WKH ZDUUDQW\ coverage described herein. This charger is warranted for the original user to be free from defects in material and workmanship. If you believe that the charger is defective at any time during the VSHFL¿HG ZDUUDQW\ SHULRG VLPSO\ UHWXUQ WKH FKDUJHU DORQJ ZLWK proof of purchase to the place of purchase for a free replacement...

Table of Contents