Panel (Front) Block-1 - Sony HCD-SBT100 Service Manual

HCD-SBT100/SBT100B/SBT300W/SBT300WB
2-6.

PANEL (FRONT) BLOCK-1

coating clip
flexible flat cable (9P)
7 Remove the flexible flat cable (9P)
6 connector
(CN906)
5 connector
(CN3001)
1 flexible flat cable (8P)
(CN404)
4 flexible flat cable (17P)
(CN506)
3 flexible flat cable (9P)
(CN340)
Note 2: When you install the connector, please install them correctly.
Insert is straight
to the interior.
connector
12
MAIN board
from the coating clip.
2 flexible flat cable (14P)
CN106
–
There is a possibility that this machine damages when not
correctly installing it.
OK NG
Insert is shallow
connector
connector connector
Note 1: CN106 and CN340 are quantity of pins of the same.
Do not insert to the wrong connector absolutely.
There is a possibility that the unit may be damaged if the wrong.
cushion (S)
ferrite core
(FC1)
20 to 25 mm
(CN407)
–
Note 3: When installing the flexible flat cable,
NG
Insert is incline
connector
connector
cushion (S)
ferrite core
(FC2)
15 to 20 mm
ensure the colored line.
No slanting after insertion.
OK
Inserting is straight to the interior.
flexible flat cable
colored line
connector
NG
Inserting is slant.
flexible flat cable
colored line
connector